Doran Scales Technical Support - Typical Error Messages

Error Displayed	What to do or Check
	*Scale Overload* The scale has been overloaded. The load on the scale exceeds the capacity by more than 105%. Remove excess weight from the scale. If the problem persists, have the scale serviced by a qualified scale repair technician. For the name of your local authorized Doran Distributor, contact us via e-mail at: sales@doranscales.com.
	*Gross Overload* The scale is in gross overload. The load exceeds the scale ratings and might result in damage to the scale. Remove excess weight immediately. If the problem persists, have the scale serviced by a qualified scale repair technician. For the name of your local authorized Doran Distributor, contact us via e-mail at: sales@doranscales.com.
	*EEPROM Error* The setup parameters that are loaded in the scale memory have become corrupted. The scale requires reinitialization by a qualified scale technician. For the name of your local authorized Doran Distributor, contact us via e-mail at: sales@doranscales.com.
	A/D Failure The scale has detected a failure in the Analog to Digital section of the scale electronics. Have the scale serviced by a qualified scale repair technician. Have the scale serviced by a qualified scale repair technician. For the name of your local authorized Doran Distributor, contact us via e-mail at: sales@doranscales.com.
	*Loading Zero* The scale is attempting to load power up zero. This message will remain until the scale is stable. Air currents or vibration may be the cause. If problems persists, the pcb or load cell may be damaged. Have the scale serviced by a qualified scale repair technician. For the name of your local authorized Doran Distributor, contact us via e-mail at: sales@doranscales.com.